Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Chino, CA
Chimney repair in Chino usually means one of two things: a cracked clay-tile liner in an older downtown-area masonry chimney, or a rusted cap and flashing on a newer tract home’s prefab flue. The fix depends on what the camera shows, and that’s where we start. Chimney Sweep Chino has served Chino since 2011, handling everything from crown resealing to full stainless relining. If you’ve got a flue that hasn’t been looked at in years, call (866) 321-6641 and we’ll schedule an inspection.
Why Chino Homes Are Different
Chino’s housing stock runs in two directions at once. South and east of the 60, you’ll find 1980s through 2000s Mediterranean-styled tract and semi-custom builds, most with factory-built metal fireplaces and short, straight-up or sidewall-discharging flues. Those units are often decorative gas or lightly used prefab wood burners. Head north toward downtown and the old citrus/dairy corridor along Riverside Drive, and the picture shifts to masonry work: early-1900s and mid-century homes with true wood-burning fireplaces and clay-tile liners that have been absorbing heat and creosote for decades.
The Inland Empire climate shapes how those chimneys fail. Hot, dry summers and mild winters mean fireplaces sit idle for months, then get stoked hard during the few cold weeks. Santa Ana winds add dry air and occasional airborne debris. Soot and creosote build slowly, but they also bake onto flue walls between uses, and a flue that sits uncleaned for years in dry heat is exactly the kind that ignites when someone finally lights a fire in late autumn.
We also see escrow-driven inspections here. Chino’s 2000s building boom moved a lot of the older core homes, and sellers routinely discovered uncertified or unlined flues during the sale process. That’s why a camera inspection is standard on every repair we quote in Chino.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Chino Services
Most Chino homeowners reach out for one of two reasons: a chimney that hasn’t been cleaned in longer than anyone can remember, or a dryer that takes forever to dry a load. Both are fire-safety work, and we handle both with the same crew.
Chimney Sweep in Chino
A sweep in Chino covers more than brushing out soot. We vacuum the full system, check the damper operation, and run a camera up the flue to look for cracked clay tiles or gaps in prefab metal piping. Older downtown-area chimneys often show hairline tile fractures that only a camera catches, and newer tract homes have their own issues with settling and cap seal failure. Whether you burn wood occasionally or you’re in escrow and need a documented cleaning, the full service is on our Chimney Sweep in Chino page.
Dryer Vent Cleaning in Chino
Lint is a leading residential fire cause, and Chino’s dry, static-prone air doesn’t help. A clogged vent also means your dryer runs longer, which costs you time and power. We treat dryer vent cleaning as its own safety-critical job, with dedicated equipment and the same type of report you get on a chimney sweep. If your dryer takes two cycles to dry a load, or you can’t remember the last time the vent was opened, see Dryer Vent Cleaning in Chino for the full scope and what we check.
Chimney Repair in Chino
Chimney repair in Chino splits along the same housing line we described. Older homes near downtown and along the former ag corridor have masonry chimneys with clay-tile liners that crack over decades of heat cycling. Newer tract and semi-custom homes have prefab metal chimneys with cap, flashing, and chase-cover failures that let water into the framing. Both are repairable, and the first step is always the same: camera down the flue, photos of what we find, and a straight answer on what needs work now versus what can wait. That’s the standard we hold across every Chimney Repair job we book in Chino.
Chimney Cap Installation
Signs you need it
Rain dripping into the firebox, birds or squirrels in the flue, or a cap that’s missing outright after a Santa Ana wind event.
What it costs in Chino
A standard stainless-steel cap installed typically runs $300 to $650 depending on flue size and roof access.
How we do it
We measure the flue, install a stainless cap sized to the crown with mechanical fasteners, and seal the attachment points against water entry.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling or walls near the chimney, rusted metal around the roofline, or damp drywall after winter rain.
What it costs in Chino
Flashing repair in Chino usually lands between $350 and $800, with full replacement running higher when the old metal is too far gone.
How we do it
We cut back the old flashing, replace the step and counter flashing with new material, and recaulk the joint where chimney meets roof deck.
Chimney Crown Repair
Signs you need it
Cracks across the concrete cap, spalling on the crown surface, or dampness inside the flue after rain.
What it costs in Chino
Crown resealing runs $250 to $450, while a full recast crown is $800 to $1,400 depending on crown size.
How we do it
We fill and seal minor cracks with a weather-resistant compound, or form and pour a new crown when the old one has separated from the masonry.
What Chimney Repair Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Chimney cap installation | $300 – $650 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair (reseal) | $250 – $450 |
| Chimney crown replacement (recast) | $800 – $1,400 |
How much does chimney repair cost in Chino?
Most Chino chimney repairs fall between $250 and $1,400 depending on the component. Cap and crown resealing sit at the low end, full crown recasting and flashing replacement at the upper end. Call (866) 321-6641 for an exact quote after a camera inspection.
Do I really need a new liner, or can the old one be repaired?
Not every cracked liner means a full reline. We use HeatShield resurfacing to restore many flues without tearing out the old tile, which saves thousands over a full replacement. If the crack is too extensive, a DuraFlex stainless liner is the right call, and we’ll show you the camera footage so you can see exactly what we see before deciding.
Brands We Service in Chino
We spec products by name because materials matter. For Chino jobs we regularly work with Olympia Chimney and Famco for caps, dampers, and chase covers, and DuraFlex for stainless relining. We stock common parts locally, so most cap and damper repairs go in within a week of the inspection. See our brands for the full lineup and why we don’t substitute hardware-store parts.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Chimney sweep (standard) | $180 – $340 |
| Chimney cap installation | $300 – $650 |
| Chimney cap replacement | $300 – $650 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair (reseal) | $250 – $450 |
| Chimney crown replacement (recast) | $800 – $1,400 |
| Chimney liner installation (DuraFlex stainless) | $2,500 – $5,500 |
| HeatShield liner resurfacing | $1,800 – $3,500 |
| Dryer vent cleaning | $130 – $250 |
| Chimney inspection (camera) | $150 – $300 |
What pushes price up in Chino is usually roof access on two-story tract homes, or older masonry that needs scaffold work. What keeps it predictable is our flat-price quote: we confirm the number before the job starts, and you don’t pay more if the crew takes longer.
Neighborhoods We Serve in Chino
We work across all of Chino, from the older blocks near downtown and the historic citrus-era streets to the newer master-planned communities south of the 60. Here are some of the neighborhoods we regularly schedule:
- Downtown Chino (historic core)
- College Park area
- The Preserve
- Butterfield Ranch
- Ranchlands
Scheduling in Chino typically runs one to two weeks out. During October and November, before the first sustained cold snap, we book up faster, so call earlier than you think you need to.
Service Area – Cities Near Chino
Chimney Sweep Chino serves the surrounding Inland Empire communities as well. If you’re in Ontario, CA, Chino Hills, CA, Eastvale, CA, or Jurupa Valley, CA, we can schedule the same camera-first inspection and flat-price repair work across those areas.
Serving Chino, CA – Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Chino
Most inspections and sweeps in Chino are scheduled within one to two weeks. Peak season for us is late October through November, when homeowners realize the first cold night is coming, so if you’re planning a repair, booking earlier in the fall avoids a wait. Call (866) 321-6641 and we’ll get you on the schedule for the next available slot.
Most of the newer master-planned communities in Chino, like The Preserve, have design guidelines for exterior changes, and a visible cap replacement can occasionally trigger a review. We can provide the spec sheet and dimensions for the HOA package, and the work itself goes in without altering the roofline, which keeps most approvals straightforward.
For the repair scope we do, cap and flashing work, crown resealing, liner installs, Chino doesn’t typically require a separate permit, since we’re restoring existing components rather than changing structure. If an inspection reveals something that does need city review, we’ll tell you before work is scheduled, and quote it separately.
If you’ve got a fireplace that hasn’t been swept in years, a dryer that runs forever, or a chimney that leaked during the last rain, call (866) 321-6641. We’ll put a camera down the flue, show you what’s there, and give you a flat price before anything gets fixed.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- David Chen"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Veronica Castillo"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Carlos Reyes