Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Chino Homeowners
Chimney repair in Chino addresses the structural and safety problems that a simple sweep does not: cracked crowns, damaged flue liners, rusted flashing, and masonry that has weathered years of Inland Empire temperature swings. A compromised chimney is not a cosmetic issue. It is a fire-containment failure waiting to happen, and in a city where winter nights dip into the 30s, a working wood or gas appliance is not optional. We are Chimney Sweep Chino, led by Pat Delano, and we have been repairing chimneys across Chino, Ontario, Rancho Cucamonga, and the surrounding communities with a specificity most generalist operations cannot match. Call (866) 321-6641 for a free repair estimate. We inspect, diagnose, and quote flat before any work begins.
Chimney Cap Installation
Chimney Cap Installation is the single most cost-effective way to prevent water penetration, animal intrusion, and downdraft problems before they require expensive masonry repair. A properly sized stainless or copper cap keeps rain out of the flue, stops birds and squirrels from nesting above the damper, and blocks sparks from exiting onto your roof. In Chino, where Santa Ana winds push embers unpredictably across shingle roofs, a spark-arresting cap is a genuine fire-safety component. We install caps from Olympia Chimney and Gelco supply lines, sized to your exact flue tile dimensions. Typical cap installation in Chino runs $150 – $400 installed, depending on flue size, cap material, and access difficulty, which is a fraction of how much Chimney Repair costs when problems are left unchecked. We do not sell universal-fit caps that rattle in the wind.
Materials and Fitment
We measure your flue opening before ordering anything. Stainless steel caps with mesh sides handle the majority of Chino installations, but we also fit copper caps for homeowners who want longevity measured in decades rather than years. Every cap is mechanically fastened, never glued or caulked in place.
When a Cap Makes Sense
You need a cap if you hear animal sounds above your damper, see water staining on the fireplace walls after rain, or notice a persistent smoky smell even when the damper is open. Missing or damaged caps are also one of the most common findings we document during pre-purchase home inspections in Chino Hills and Eastvale.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is appropriate when your existing cap has rusted through, lost its mesh screening, or no longer sits securely on the flue. A cap that lifts in high wind or lets rain channel down the flue interior is doing nothing for you. We see failed caps regularly in Chino, especially on older tract-style homes where the original caps were thin-galvanized units never meant to last more than a decade. Replacement cost typically falls between $180 and $420, which includes removing the old cap, inspecting the flue tile edge for damage, and installing a properly sized replacement. We work with Olympia Chimney cap hardware because their mounting brackets and screen profiles hold up in sustained sun and wind exposure.
Common Failure Points
Most cap failures start at the mounting screws or the mesh-to-lid seam, not the lid itself. We check both before quoting, because a cap that looks fine from the ground can have screen gaps large enough for a bird to work through.
Upgrade Opportunity
If your flue is being relined, replacing the cap at the same time saves a second service call. We coordinate cap replacement with liner work whenever the existing cap is near the end of its service life.
Chimney Liner Installation
Chimney Liner Installation is the repair that makes an older chimney safe for continued use. The liner is what contains combustion heat and channels exhaust out of your home. When it cracks or gaps, the risks are not theoretical: carbon monoxide leakage into living spaces and chimney fires are both documented consequences of compromised flue liners. We install DuraFlex flexible stainless-steel liners, a trade-grade system designed for real-world offsets and existing masonry flues. Full liner installation in Chino typically ranges from $2,200 to $4,800, with factors including flue height, appliance type, and whether the existing tile liner must be partially removed. HeatShield resurfacing is the cost-conscious alternative when the liner is damaged but not structurally failed, and we are one of the few Chino-area companies equipped to do both.
DuraFlex vs. HeatShield
DuraFlex is a full-liner replacement: a continuous stainless-steel tube that becomes the new flue. HeatShield is a cerfied resurfacing system that restores the interior of a damaged clay tile liner without full replacement. We choose based on what the camera inspection shows: liner condition, tile alignment, and firebox height.
What the Inspection Shows
Every liner quote we provide starts with a camera inspection. There is no other way to see tile cracks, separation gaps, or heat damage behind the damper. We show you the footage before recommending anything, so you are making a decision based on what your chimney actually looks like inside.
Chimney Flashing Repair
Chimney Flashing Repair fixes the metal-to-masonry junction where most chimney leaks originate. Flashing is the sheet-metal barrier that seals the gap where your chimney passes through the roofline. When it lifts, corrodes, or separates from the mortar joints, water follows the path of least resistance into your attic and down the chimney structure. Leaking flashing is frequently misdiagnosed as a roofing problem, which is why we inspect the full junction before quoting. Flashing repair in Chino typically runs $350 – $900 depending on access, extent of the failed section, and whether counter-flashing must be cut back into the mortar joints. We use Famco flashing products and step-flashing methods that shed water correctly for the low-slope and tile-roof profiles common in Chino, Chino Hills, and Diamond Bar.
Repair vs. Full Replacement
A small lifted corner can often be re-seated and sealed. But if the metal is rusted through or the previous installer used roof cement as a substitute for proper step flashing, full replacement is the fix that lasts. We show you the difference on the roof, not from a brochure.
Working With Your Roofer
If you are already re-roofing, we coordinate directly with your roofing contractor. Chimney flashing is a chimney component, and it should be handled by the chimney crew, not left as an afterthought by a roofer who does not specialize in flue geometry and masonry anchoring.
Chimney Crown Repair
Chimney Crown Repair addresses the concrete or mortar crown that caps the masonry chimney above the flue tiles. A cracked or spalling crown lets water into the brickwork, and in Chino’s cycle of hot summers and occasional winter frost, small cracks expand into deep spalling within a few seasons. The crown is not the same as a rain cap; it is the structural top surface that seals the masonry. Crown repair typically costs $400 – $1,200 in Chino, depending on crown size, crack severity, and whether the crown can be sealed and resurfaced or must be formed and re-poured. We inspect the crown on every repair call, because a damaged crown will quietly undo liner and flashing work if left alone.
Seal and Resurface
For crowns with surface cracking but solid structure, we use a flexible crown sealant that allows for thermal expansion without re-cracking. This is standard practice on capped flues and multi-flue chimneys across Chino and Eastvale.
Full Re-Form and Pour
When the crown has lost its slope or large sections have separated, we re-form it with a proper overhang so water drips away from the brick. Improperly poured crowns from original construction are common; our re-pours are built to shed water, not trap it.
Chimney Repair Companies
Chimney Repair Companies in Chino are not all structured the same way. Some are sweep-first operations that handle basic cap and damper work but sub out masonry or liner work. Others are general handyman services that will patch a crown with whatever is in the truck. We built Chimney Sweep Chino as a full-service repair operation: sweep, masonry, liner installation, flashing, and crown work all handled by our own crew, led by Pat Delano. We stock and install from six professional supply lines, including HeatShield, Gelco, Olympia Chimney, and Famco, which is the same sourcing model used by contractors and inspectors who see this work every day. If you are comparing companies, ask three questions: do you own a camera inspection unit, do you install your own liners or sub them out, and will you show me the damage before quoting the repair.
Specification-Grade Work
We specify products by name because materials matter. HeatShield for resurfacing, DuraFlex for relining, Famco for flashing and dampers. If a company cannot name the liner or cap they install, that tells you something about the depth of their toolkit.
One Crew, No Subcontracting
Chimney cleaning and repair handled by the same crew means the person who diagnoses the problem is the person who fixes it. That continuity matters on multi-issue chimneys, which are the norm in older Chino neighborhoods rather than the exception.
Chimney Masonry Repair
Chimney Masonry Repair covers the brick, mortar, and structural masonry that make up the chimney itself, not the components inside it. In Chino, we see three recurring masonry issues: spalling brick faces from years of moisture absorption, eroded mortar joints from wind-driven rain, and step cracks caused by settling or seismic movement. Left alone, spalling brick exposes the chimney core and accelerates structural deterioration. Ontario Chimney Repair customers see similar numbers: masonry repair pricing in Chino runs from $500 for localized repointing up to $3,000+ for partial rebuilds, depending on affected area, material matching, and chimney height. We match mortar composition and brick color before starting, because a mismatched patch looks worse than the damage it fixes and lowers resale value.
Repointing and Joint Work
We rake out deteriorated mortar to a consistent depth and repack it with a mortar mix matched to the existing joint profile. Proper repointing is not surface dressing; it is the structural repair that stops water from driving into the brick mass.
Partial Rebuilds
When brick faces have spalled beyond a surface repair, we remove and replace individual bricks or rebuild sections of the chimney stack. This is where the difference between a chimney mason and a generalist shows: the bond pattern, mortar color, and joint tooling all need to match or the repair reads as a scar.
Brands We Service
We work with HeatShield for liner resurfacing. HeatShield is a cerfied repair system that coats the interior of a damaged clay tile flue with a ceramic material that restores a smooth, insulated surface, and we have been applying it on Chino chimneys where a full reline is not necessary but a bare tile liner is no longer safe.
We install Gelco chimney caps because their stainless and copper cap lines hold up to the sustained UV and wind conditions we get here in the Inland Empire. Olympia Chimney supplies the cap hardware and termination components we trust for standard flue profiles. Famco products cover flashing, dampers, and ventilation accessories, and we specify them on repair jobs because their metal gauges and fastening systems match what the original masonry was built around. Whether you have an existing Olympia cap, a Famco damper, or any other make on your chimney, we can inspect, service, and upgrade it without starting from zero.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water staining on the ceiling or wall near the chimney. This is usually flashing or crown failure. The longer it sits, the wider the repair area gets, and mold becomes a secondary problem that costs more than the original flashing fix.
- Chunks of brick or mortar on the ground at the chimney base. Spalled brick is a symptom of water-saturated masonry. If the face of the brick is separating, the chimney’s structural layer is exposed and the damage compounds every winter.
- Visible cracks in the chimney crown or on the chimney exterior. Cracks that run vertical often indicate settling. Cracks that run horizontal near the top suggest freeze-thaw damage. Both need a masonry assessment before they widen.
- Strong smoky odor in the house even when the fireplace is not in use. This usually points to liner damage or a failed damper. It can also indicate backdrafting, where exhaust is being pulled back into the home instead of venting upward.
- Evidence of animal activity above the damper. Nesting material in a flue is not just a blockage; it is a fuel source. A chimney fire involving a bird or squirrel nest is one of the fastest-spreading fires we have seen in residential flues.
Our Process, Step by Step
- 1
Site inspection and camera scope. We start at the roofline and work down, checking the crown, flashing, cap, and exterior masonry. Then we run a camera through the flue to document liner condition, obstructions, and firebox clearances. You see the footage as we capture it.
- 2
Written findings and repair options. You get a plain-language report with the camera stills referenced. We walk through what is urgent, what can be deferred, and what the cost difference is between repairing and replacing. No quoted work happens without you seeing the evidence.
- 3
Flat-price proposal. We quote fixed prices before any work starts. The number on the proposal is the number on the invoice unless we uncover something structural during the repair that changes scope, in which case we stop and call you.
- 4
Repair execution with specified materials. Every repair uses the material we specified in the quote: DuraFlex for liners, HeatShield for resurfacing, Famco for flashing, Olympia or Gelco for caps. We do not substitute whatever is on the truck.
- 5
Post-repair verification and documentation. After the repair, we run the camera again when the scope of work calls for it, and we photograph the completed work. You get the after photos alongside the before photos so you can see exactly what changed.
How Much Does Chimney Repair Cost in Chino?
Chimney repair pricing in Chino ranges from about $150 for a simple cap installation to over $4,800 for a full liner replacement on a tall masonry chimney. A typical crown reseal lands around $600 – $900. Flashing repair tends to run $350 – $900. Liner work is the biggest variable: HeatShield resurfacing costs noticeably less than a full DuraFlex reline, but the right choice depends on what the camera shows. Masonry repointing starts around $500 for localized joints and climbs with square footage and chimney height.
Three factors move the price: access (second-story rooftops and steep pitches cost more to work), existing damage (water penetration that has already spread into the brick means more repair area), and material selection (a copper cap costs more than stainless, and a full liner costs more than a resurface). The best way to avoid overpaying is to get a camera-backed diagnosis from a company that does the repair work itself, not one that is going to add a markup and sub it out. Our estimates are free, they include the inspection findings with photos, and the price we quote is the price you pay.
Our Service Area Near Chino
Chimney Sweep Chino serves Chino and the surrounding communities: Ontario, Chino, Ontario, Rancho Cucamonga, Pomona, Corona, Chino Hills, Jurupa Valley, Upland, West Covina, Eastvale, Diamond Bar, and Yorba Linda. Most repair inspections in Chino can be scheduled within the week, and we group service routes so that if you are in Chino Hills or Eastvale, you are not waiting on a truck from the other side of the county. Call (866) 321-6641 and we will tell you the next available inspection window for your area.
Serving Chino, CA – Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Chino
Chimney repair is any structural or component work that restores a chimney to safe operating condition: liner installation, crown repair, flashing repair, masonry repointing or rebuild, cap replacement, and damper work. It is distinct from a sweep, which removes creosote and soot but does not address structural damage. In Chino, where homes range from 1960s tract construction to newer builds, repair work is often needed before the first fire of the season.
Most cap, flashing, and crown repairs are completed in a single visit of two to four hours. A HeatShield resurface typically requires two visits because the material needs cure time between coats. Full liner installation or partial masonry rebuilds can take one to two days depending on flue height and access. We give you a specific timeline in the written proposal so there is no ambiguity about scheduling.
Chimney repair in Chino ranges from $150 for a cap installation to $4,800+ for a full liner replacement. Flashing and crown work typically falls between $350 and $1,200. The price depends on access, material selection, and the extent of the damage we document on camera. Call (866) 321-6641 for a free estimate with a camera-backed diagnosis.
Yes. We apply HeatShield for liner resurfacing and install DuraFlex flexible stainless-steel liners for full relines. We service chimneys that already have these systems in place, and we can assess whether an existing liner is holding up or needs attention. The inspection footage tells us whether a resurface, a reline, or no liner work at all is the right call.
We treat active water intrusion, significant masonry collapse, and liner damage that is actively venting exhaust into the home as urgent. If you see water coming through the ceiling near the chimney or smell gas or smoke with no fire, stop using the appliance and call us. We will triage the situation over the phone and schedule accordingly. Call (866) 321-6641 and describe what you are seeing.
Workmanship on our repairs is backed by a written warranty, and material warranties follow the manufacturer’s terms for the brands we install, including HeatShield, DuraFlex, Olympia, Gelco, and Famco. We stand behind the work because we are the ones who did it, not a subcontracted crew. Warranty terms are included in your written proposal before any money changes hands.
Clear the area around the fireplace and make sure we have attic or crawlspace access if the repair involves flashing inspection. Move any furniture or decor away from the hearth so we can lay down drop cloths and work freely. If you have a gas appliance, shut off the pilot light before we arrive if you know how to do so safely; otherwise we will handle it during the visit.
Schedule Your Chimney Repair Service in Chino Today
If your chimney needs work, do not wait until the first cold night to find out how bad the damage is. Call (866) 321-6641 for a free camera-backed inspection and a flat-price repair estimate. Pat Delano and the Chimney Sweep Chino team serve Chino, Ontario, Rancho Cucamonga, Corona, and the surrounding communities. Estimates are free, the diagnosis is documented, and the work is done by our own crew with trade-grade materials from HeatShield, DuraFlex, Olympia, Gelco, and Famco.
Written by Pat Delano, Owner at Chimney Sweep Chino, serving Chino and the Inland Empire.